car rearview mirror sticker
Feature:
1. Product material: The rearview mirror glue is made up of two parts: the mirror glue and the activator;
2. Product characteristics: it is superior to epoxy glue and 502 products, and has good resistance to high temperature and humidity;
3. Wide range of uses: Rearview mirror glue is mainly used for the bonding of rearview mirrors and windshields. It can also be used to bond and connect metal to metal, glass and glass, glass to metal, ceramics, jewelry;
Packing list:
1 * car rearview mirror sticker
How to use
1.Remove the mounting button from the mirror bracket note which side opens up.
2. On the outside of the windshield, circle with a crayon to identify the old mirror button location.
3. Completely scrape windshield glass and button to remove all old decals. All old adhesives must be removed for a new application to adhere.
4. Open the wiper/activator towel by pushing both sides of the protective packet into the dot at the top of the packet. Fold the package again to use. The towel must be attached to the package.
5. On the inside of the windshield, clean the marked area and primer with the wiper/activator towel. Let dry for 20 seconds. Do not touch the windshield after the activator has been applied. Note: Do not clean the button with the cleaner activator towel.
6.Remove the twist cap and cut off the sticky tip. Apply a drop of
Adhesive only in the center of the button. Note: Do not apply adhesive to both the button and the glass, as the adhesive does not work properly.
7.Immediately apply button to windshield to ensure correct side is up and hold firmly in place for 1 minute. Let it set for 30 minutes before mounting the mirror.
